Electric start conversion:

[Buckshot 1 15]

:wh: I have gathered all the parts to install electric start on my H60 in my 656. In checking the wiring schematic, I see no starter seloniod in the schematic. So wiring it according to the schematic what gage wire is used? for your time.

[305 380]

i used 6 gauge when i put new battery cables on the H60 in my Lawn Ranger

[wallfish 17,568]

They also used a key switch that could handle the amperage that the starter draws. It will fry a switch that was not designed to be wired directly through the switch.

[Buckshot 1 15]

:wh: Guys for your replies. 6 gauge it will be. I have ordered the correct Ignition switch PN: 4987. Another question, in my parts manual for the 656, they do not show a battery hold down. Anyone know what they used/PN ? :dunno: