IthacaJeff 151 #1 Posted September 30, 2011 Okay, here goes. . . Over the past couple of years I've managed to scrounge up a number of attachments , but there is not enough space in my shed. They have to sit outside, including a 54" snow blade, Brinly single bottom plow, cultivators, discs, spring-tine drag, and a snow blower. Obviously, rust is setting in, but I'd like to do more to protect them. Putting them under a tarp may work some, but condensation still gets them wet. Having them in the grass, I know, is terrible, so they can sit on pallets. What I'm looking for is a spray, or something like that that can at least slow down the rust. Any ideas? (Yeah, I know, a nice heated barn would be awesome!) Jeff Share this post Link to post Share on other sites
farmer 1,078 #2 Posted September 30, 2011 Jeff, On the farm all eqiupment is barn stored, having said that though, all shiny parts eg- Plough moldboards, Combine augers, Forage harvester augers etc I coat with chain saw oil, its sticky and lasts for months. In your situation maybe diesel with a spot of oil mixed in would do the job? :thumbs2: Share this post Link to post Share on other sites
dodge78 94 #3 Posted September 30, 2011 My dad used old engine oil on the farm. Some of the demo derby guys use old tranny fluid. Share this post Link to post Share on other sites
can whlvr 994 #4 Posted October 1, 2011 we use aa 50 -50 mix of 10w40 and clean motor oil,it then will spray in a plastic spray bottle Share this post Link to post Share on other sites
IthacaJeff 151 #5 Posted October 1, 2011 Thanks all. . . I'm getting ready for my winter oil change. Does anyone foresee any problems with using the used motor oil to wipe down some of the equipment? Jeff Share this post Link to post Share on other sites
littleredrider 409 #6 Posted October 1, 2011 I don't see a problem. It will be "dirty" instead of clean oil....All the stuff in my storage that took a swim is covered in a thin coat of oil. Slimy mess to say the least, but everything is hard to get a hold of, and even some raw steel I have isn't rusting, or my tools. (Guy next to my unit has got to be p!ssed with engine/gear oil all over his stuff) Share this post Link to post Share on other sites
stevebo-(Moderator) 8,557 #7 Posted October 1, 2011 Those who know me know I use the dirty old on my old machines I think Matt calls it salad mix :thumbs2: Share this post Link to post Share on other sites
Herbl 10 #8 Posted October 1, 2011 Look into a spray called Fluid Film, really good stuff, it will cost you more than old 10w40 but it is meant to do what you are asking. I use it and it works very well.... Share this post Link to post Share on other sites
can whlvr 994 #9 Posted October 2, 2011 i agree with fluid film too,we use it on our dirt bike chains,its environmentatly freindly too,can also water proof your boots with it too Share this post Link to post Share on other sites
shorts 182 #10 Posted October 2, 2011 cosmoline, it's like a combination of grease and parafin or spray on chainsaw chain oil it's sticky or try a liquil floor wax and spray it on. There was a time that I was assigned a company van, 1 of the maintaince requirements was apperance, washed weekly and waxed as necessary, liquid floor wax in a spray bottle and an old sock to apply it was my friend every couple of months. I could wax and polish a fullsize van in less than 1/2 hour. Share this post Link to post Share on other sites
mr.pipes 4 #11 Posted October 2, 2011 I could wax and polish a fullsize van in less than 1/2 hour. Wish you were closer Share this post Link to post Share on other sites
IthacaJeff 151 #12 Posted October 2, 2011 Thanks gents; never heard of Fluid film or Cosmoline. They may only be available online around here, but I'll check the usual suspects (e.g., TSC) for something like them. Being cheap I'd just as soon use the used motor oil, but getting into the intricate nooks and crannies would be better for a spray. Although, if someone were to buy the blower ($70), then I would not need to store it. Jeff Share this post Link to post Share on other sites
shallowwatersailor 3,214 #13 Posted October 4, 2011 I remember growing up in the 50's with the surplus Jeeps from WWII "for sale for $50.00!" They were cosmolined to prevent rust and had to be assembled. I seem to recall that it was a waxy grease that was difficult to remove - but did the job. My older brother and I always talked about getting one but I doubt that the sale was legit for $50.00. Share this post Link to post Share on other sites
MrTrimmier 12 #14 Posted October 13, 2011 Corrosion X is by far the best product I've found for preservation. $16.00 a spray can or so.... Mike Share this post Link to post Share on other sites
P3x 57 #15 Posted December 11, 2011 LPS 3 is a Heavy Duty Corrosion Inhibitor. Waxy and thick... Share this post Link to post Share on other sites
sorekiwi 761 #16 Posted December 11, 2011 The disadvantage of the Cosmoline type sprays is that you need to get the stuff off again before you use it. The oil type sprays you can just go back to work. Cosmoline is ideal for parts that are going to sit around for a while before you find a use for them. Share this post Link to post Share on other sites