commodude90 0 #1 Posted September 26, 2011 Hello Folks, I just found a complete HY-2 hydraulic lift set up from a 702 although it is missing a belt cover. It does drip hydraulic flud from the pump input shaft under the pulley. It is a hein werner pump. Can any tell me about finding the seals for this lift. I may install it on my 701 for the snow blower. Thanks. Share this post Link to post Share on other sites
Lane Ranger 10,530 #2 Posted September 26, 2011 INDYWH (Marshall Fyfe) sells the replacement parts you need to rebuild one of these. Check the membership list for IndyWH and send him a note and he will let you know what you need and the cost. Very reasonable and he sends as a kit. I have rebuilt three Hein Werner pumps with Indy's assistance! Like Redrider says below: No guard or belt cover but he should have the interenal pump o rings and seals. Share this post Link to post Share on other sites
littleredrider 408 #3 Posted September 26, 2011 I got his kit too, but need the belt cover. I don't think he makes those or anyone else for that matter. Share this post Link to post Share on other sites
commodude90 0 #4 Posted September 26, 2011 Awesome, thanks you guys! Share this post Link to post Share on other sites