Help with HY-2 parts

[commodude90 0]

Hello Folks,

I just found a complete HY-2 hydraulic lift set up from a 702 although it is missing a belt cover. It does drip hydraulic flud from the pump input shaft under the pulley.

It is a hein werner pump. Can any tell me about finding the seals for this lift. I may install it on my 701 for the snow blower. Thanks.

[Lane Ranger 11,633]

INDYWH (Marshall Fyfe) sells the replacement parts you need to rebuild one of these.

Check the membership list for IndyWH and send him a note and he will let you know what you need and the cost. Very reasonable and he sends as a kit.

I have rebuilt three Hein Werner pumps with Indy's assistance!

Like Redrider says below: No guard or belt cover but he should have the interenal pump o rings and seals.

[littleredrider 409]

I got his kit too, but need the belt cover. I don't think he makes those or anyone else for that matter.

[commodude90 0]

Awesome, thanks you guys!