60" deck question

[jimbo7921 8]

Can anyone tell me the length of the belt that runs the 3 deck blades. The parts list tells the length of the drive belt to the tractor, but not the other. My decks serial number is 78390. thx jim

[TT-(Moderator) 1,129]

If you have the Toro/WH part number, you can look it up on this list:

http://outdoorpowerinfo.com/belts/toro_belts.asp

This site will help if you're looking for non-OEM belts:

http://www.gates.com/part_interchange/inde...ocation_id=3286

[jimbo7921 8]

thx Terry

[jimbo7921 8]

Second question, when i lift my deck the only thing i can get off the ground are the front wheels of the deck, the rears still run on the ground. I have installed all new parts for the attach a matic and tightened the rear threaded rod connected to the adjustment bar on the rear wheels (i seemed to get a little more lift when i left it loose) any ideas anyone? There has to be an adjustment I'm missing somewhere, the goal is to at least get the rear wheels off the ground. thx jim

[stevebo-(Moderator) 8,059]

jimbo-

That is as far as it will lift. They are big and heavy but cut great !!

[cheesegrader 433]

My 60" deck uses a 131" x 5/8' spindle belt (Toro 112449)

and a 102" x 1/2" drive belt, (Toro 1130720

but the model number is different ---C560sc01

[jimbo7921 8]

thx cheesegrader, I found the length on terrys list and ordered two Kevlar wrapped aftermarket belts for $60 instead of the toro belts which would have run about $160.

[SAM58 30]

Just go to Tractor Supply and buy a 1/2" x 100" belt for around $15.00

Series A-100

1/2" x 100"

[jimbo7921 8]

Well, the Tsc store's here in Canada don't sell parts like that here, they actually are more like the farmers Home Depot. For me to order parts here from Toro costs about 5 to 15$ more than Parts Tree, and there isn't a whole lot of used either. Gotta save a couple bucks here or there.