ron2681 0 #1 Posted August 28, 2011 hey fellas, check it- ive got juice down to the starter. when i hold my meter on the eyelet of the solenoid to starter cable (on the starter side) its got 12v. but when i put my meter on the actual stud on the starter itself, nothin. and the cable is tight on the stud! what gives? Share this post Link to post Share on other sites
bell 11 #2 Posted August 28, 2011 Sound like a dirty connection to me.... Share this post Link to post Share on other sites
rmaynard 14,909 #3 Posted August 28, 2011 or a bad crimp in the end of the cable. Had the same problem on one of mine. I re-crimped the lugs on the ends of the cable and problem solved. Share this post Link to post Share on other sites
ron2681 0 #4 Posted August 28, 2011 sounds good, that will be my next step. thanks guys! Share this post Link to post Share on other sites
ron2681 0 #5 Posted August 29, 2011 ITS ALIVE!!!! thanks for all your help dudes, it was a bad connection. im always overlookin the easy stuff! Share this post Link to post Share on other sites