Cole 25 #1 Posted August 5, 2011 is it possible to make a hitch from flatstock for my b-100 Share this post Link to post Share on other sites
mr.pipes 4 #2 Posted August 5, 2011 I suppose you could make anything with the right tools and skills. What type of hitch are you looking for? You can find a drawbar hitch for next to nothing on Ebay or maybe from a member here. Share this post Link to post Share on other sites
rmaynard 14,948 #3 Posted August 5, 2011 Unless you need something special, as Mr. Pipes said, it's easier to just get a used one from a RS member or eBay. I have at least four of them if you need one. Share this post Link to post Share on other sites
Cole 25 #4 Posted August 5, 2011 thank you for all the reply's i have made the hitch out of 1 in and 2 in flat-stock. my father said that my welds are so good the frame will twist in half be for the hitch brakes (the frame wont brake thank you wheel horse ) the type of hitch I'm making is for a trailer, aerator, spreader, Etc. here are some pics http://www.flickr.com/photos/cole399/sets/72157627240703461/ Share this post Link to post Share on other sites
Forest Road 594 #5 Posted August 6, 2011 First off....I'm not his daddy!!! My Cole is fast asleep in bed I made this up a few months back. And just turned out a couple more similar to it. I might be selling them if you're interested. Just PM me. http://www.wheelhorseforum.com/index.php?showtopic=29945 Share this post Link to post Share on other sites
Cole 25 #6 Posted August 7, 2011 thanks for the offer. its a weird coincident how you nickname is Cole's dad and my name is Cole :woohoo: Share this post Link to post Share on other sites