Martin 2,133 #1 Posted July 11, 2011 at the request of my son, kent (behind the camera) here are two vids of the 1054 hookin up......... now dad thought it was fun, but he realizes what the consequences could be too, and hes gonna keep this sort of thing to a minimum. unless somebody mysteriously drops off a supply of replacement transmissions. engine about half throttle...2000-2500rpm. in 3rd...enjoy. click.click...... Share this post Link to post Share on other sites
Indy w h 5 #2 Posted July 11, 2011 Looking good Martin !! Indy Share this post Link to post Share on other sites
Martin 2,133 #3 Posted July 11, 2011 I see a problem here though. If dads abusing the tractor then it's going to be hard for him to yell at the kid for doing it too..... I already have a hard time getting him to treat the hydro on the 875 with care.... :woohoo: Share this post Link to post Share on other sites
tunahead72 2,551 #4 Posted July 12, 2011 engine about half throttle...2000-2500rpm. So ... do you routinely run at 4,000-5,000 RPM at full throttle? That COULD explain the noises you've been writing about in your other thread. :woohoo: Share this post Link to post Share on other sites
tunahead72 2,551 #5 Posted July 12, 2011 If dads abusing the tractor then it's going to be hard for him to yell at the kid for doing it too..... But dad's NOT "abusing the tractor", he's "testing the drive belt", remember? :woohoo: Share this post Link to post Share on other sites
earlleecliffton 38 #6 Posted July 12, 2011 Be careful, I stood my 1277 almost vertical showing my brother it would pull the front wheels up :woohoo: Share this post Link to post Share on other sites
