Is this plow deck set up correctly?

[Gko 0]

Hi Everyone.

I'm a newbie here as well as with these tractors.

I purchased a rear plow for my Wheel Horse and I'm not sure that it's set up properly. It seems to be digging too deeply so thats what makes me think the setup in incorrect.

Please take a look. Any advice is appreciated.

Thanks!

Attached Image

[Gko 0]

Another angle

Attached Image

[JUSS10 250]

thats one crazy looking plow setup... do you have a picture of the whole plow? the angle of the mold board is also very important and i can't see it in your picture...

[JUSS10 250]

I should also note, it looks like its made for a lift hitch, you just have a tow style hitch on your tractor

[mavfreak 11]

this thread will help you set the plow up....once you figure out that setup you have there

http://www.wheelhorseforum.com/index.php?...ndpost&p=115835

[Gko 0]

Know where I can get a lift hitch? Another photo below. Thanks

Attached Image (Click thumbnail to expand)

[CasualObserver 3,411]

You're going to have a difficult time getting it to dig more shallow with the hitch that low. A lift hitch of any sort won't really help you with what you've got going on there. I don't know what kind of plow that is you have, but just so you know, it's not It looks more like an adapted piece for an old two wheel tractor, or maybe even an actual pony. You need to get the mounting point high enough that the plow beam is sitting level when you're plowing. (if that makes sense) At a very minimum, try to get that joint contraption attached to the top of the hitch instead of below it, but I'd guess you need the whole thing to come up about 4-6 inches or so.