kirby 0 #1 Posted June 28, 2011 this pulley came off and i dont see a bolt or anyway to attach it. any help would be appreciated. how does it attach Attached Image Share this post Link to post Share on other sites
daveoman1966 3,632 #2 Posted June 29, 2011 That is the center deck double belt pulley. It is the 'Double-D' type pulley and it MUST fit snugly onto the mating spindle shaft. There should be a bolt approx 1.25" long with 9/16 hex end that goes thru it and threads into the top end of the shaft. If it came off while you were mowing...... not a good sign. If it is slopped out, you'll have to replace it. for further details, PLEASE... send me an OFF-SITE email. my address is: daveoman@windstream.net. Share this post Link to post Share on other sites
kirby 0 #3 Posted June 29, 2011 even the other deck i have that center pulley doesnt have a bolt in it but its attached tight. the deck model number is 5 0721 8 Share this post Link to post Share on other sites
daveoman1966 3,632 #4 Posted June 29, 2011 Once again, I'll ask you to send me an OFF-SITE EMAIL. That is, EXIT THIS FORUM, then send an email to me.. my address is: daveoman@windstream.net Just copy/paste that into your address book, then contact me with a subject line like: 36 DECK Share this post Link to post Share on other sites
kirby 0 #5 Posted June 29, 2011 i did send you an offsite message to the email address you said Share this post Link to post Share on other sites