SousaKerry 503 #1 Posted June 21, 2011 During my spare time at work I have been busy with the CAD system. Here is what I have so far uni-drive We use Solid Edge ST3 for those of you who do a little Engineering/Drafting work. After I get the models done I will make prints and post them so others may use them when fabricating equipment. I do all my fab work at work after hours and it is a little difficult to drag a tractor in here every time I make up something accurate drawings should help speed up the process. :hide: Share this post Link to post Share on other sites
VinsRJ 723 #2 Posted June 21, 2011 So are you going to provide Uni-Drive prints? Share this post Link to post Share on other sites
SousaKerry 503 #3 Posted June 21, 2011 Not detailed enough to manufacture basically rough outside dimensions to help design attachments and accessories. Eventually I would like to do the basic rolling chassis of a C series tractor. Share this post Link to post Share on other sites
Guest #4 Posted June 22, 2011 From one engineer to another... nice work. Can't wait to see the rest. :hide: Share this post Link to post Share on other sites
SousaKerry 503 #5 Posted June 23, 2011 little more work done Click here for full sized images Share this post Link to post Share on other sites
DoctorHfuhruhurr 137 #6 Posted June 23, 2011 Have you ever used photofly? (link below) In concept it looks slick. You take a ton of photos and it will make a 3d model of it that can supposedly be manipulated by design software. http://labs.autodesk.com/utilities/photo_s...ditor/overview/. Share this post Link to post Share on other sites
SousaKerry 503 #7 Posted June 23, 2011 interesting I'll have to look into it more right now I'll stick to my calipers and solid model software :hide: Share this post Link to post Share on other sites