JUSS10 250 #1 Posted June 16, 2011 well i was hoping to bolt on my mower deck now that i got the 1054 running and driving but i am at a loss. its a LOT more difficult to mount than the decks on my round hoods. Lane sent me a manual which is very helpful put the pictures are to grainy to see whats going on. I think i have all the parts (i have a dump trailer full of parts for it) but i would really appreciate some photos of the front and rear mounts for the deck and how they attach. Thanks! Justin Share this post Link to post Share on other sites
tunahead72 2,581 #2 Posted June 17, 2011 Which deck? I don't know if I can help you, but I do have an original set of parts lists & instructions for a bunch of mowers that were available for the 1054 and other tractors of that era. It's in very good shape, the photos may be better than what you already have, and there's a good bit of text and diagrams to go along with them. I can scan anything that might be relevant and e-mail it to you. Problem is, I'm leaving for a trip first thing in the morning, and I won't be back until very late Sunday night. But I'll check in again first thing Monday morning, if nobody else has anything better for you by then, I'll let you know what I can do. Good luck! Share this post Link to post Share on other sites
Lane Ranger 11,633 #3 Posted June 17, 2011 JUSS10 : I have a few pics of the belts set up on the 48 inch mower deck for the 1054. Some more are located here: http://s728.photobucket.com/albums/ww284/L...k%20for%201054/ :hide: Share this post Link to post Share on other sites
JUSS10 250 #4 Posted June 17, 2011 yeah i figured out the belts. its the rear bracket I am confused on. i think i know how it goes but I'm not sure. do you use two separate bolts on the frame by the foot rests to hold that bracket in? then which of the 3 positions on the back of the deck does that bracket go in? from the manual i read that the rear bracket stays on the tractor but swing up. is the front mower bracket supposed to come off with the deck when you take the deck off? thanks Justin Share this post Link to post Share on other sites
JUSS10 250 #5 Posted June 18, 2011 i was able to figure it out, sharpened the blades and cleaned all the pulleys, greased the spindles tensioned the belts. fired it up and it seems to work pretty good! thanks for the pictures you posted, they helped with a few things. now i just need the grass to grow (i mowed thursday night, maybe saturday or monday it'll be ready) justin Share this post Link to post Share on other sites
tunahead72 2,581 #6 Posted June 20, 2011 Excellent! But no fair encouraging the grass to grow! :WRS: Share this post Link to post Share on other sites