MaineDad 87 #1 Posted June 2, 2011 Guys, Thanks to Darren, I now have a deck for my 753. I need some pictures of how to install the deck and the part numbers of the belts. Can anyone help? Thanks in advance... Micah Share this post Link to post Share on other sites
MaineDad 87 #2 Posted June 2, 2011 Here's the deck; Share this post Link to post Share on other sites
squonk 43,844 #3 Posted June 2, 2011 Not sure they are the same, but the belts on my 704 deck are Napa 3L310W Share this post Link to post Share on other sites
MaineDad 87 #4 Posted June 2, 2011 Mike, Thanks. Do you have a picture of the idler pulley setup? I have the pedal assembly, but not the pulley. Share this post Link to post Share on other sites
squonk 43,844 #5 Posted June 3, 2011 I don't have a good pic. There is just an arm on the pedal that a pulley bolts to., nothing fancy. If you need a pic I can take one. Share this post Link to post Share on other sites
squonk 43,844 #6 Posted June 4, 2011 My bad. They are 3L370W. Stupid glasses!! :WRS: Share this post Link to post Share on other sites
MaineDad 87 #7 Posted June 9, 2011 I guess I need a close up of the pedal and pulley assembly and how it attaches. I just received the pedal / pulley assembly from eBay and I guess I need some help :hide: Share this post Link to post Share on other sites
squonk 43,844 #8 Posted June 10, 2011 Here's how the pulley and pedal are mounted on my 704. It mounts on the foot stand bar: Share this post Link to post Share on other sites
MaineDad 87 #9 Posted June 10, 2011 Mike, Thanks. So it looks like I am missing a spring. Easy find though. Where does the other end of the spring attach too? Also, does the pulley bolt to anything like the deck carrier? It has an arm with an obvious bolt hole. Thanks for the help. I owe you one! Share this post Link to post Share on other sites
squonk 43,844 #10 Posted June 10, 2011 Here is another view of the PTO pedal. The other arms fastens to a stud on the fast hitch. The spring hooks to a cotter pin that goes to s hole in the frame. As far as owing anything to me, the if I'm ever in Maine again ,you can cook me some Ployes!! Share this post Link to post Share on other sites
dgoyette 12 #11 Posted June 12, 2011 Micah, Having any luck with finding all the missing parts? Hope it is coming along. Share this post Link to post Share on other sites
printerguy1 0 #12 Posted July 1, 2012 do you any pic of the other end Share this post Link to post Share on other sites
zanepetty 117 #13 Posted January 13, 2014 What connects the pulley to the pedal? I'm having a hard time figuring mine out. Share this post Link to post Share on other sites
Lane Ranger 11,410 #14 Posted January 13, 2014 (edited) The pulley is connected to a plate on the frame -as Squonk noted above. The plates are the old style quick attach and go in front of the pedal that engages the idler. I may have another photo of this set up that shows these parts better that I will post. Edited January 13, 2014 by Lane Ranger Share this post Link to post Share on other sites
zanepetty 117 #15 Posted January 13, 2014 Thanks a ton. I would appreciate that. I see where the pulley itself mounts to the quick attach mount but I don't understand how the pedal engages it. Share this post Link to post Share on other sites
oaktown1987 82 #16 Posted January 19, 2014 I need 2 36" decks like that or a rm-425 Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
