jasoncracer 0 #1 Posted May 29, 2011 I.used same stuff as stock rear lift cable it stretched a few times I tightened all was well now it just keeps loosing from the clamps could it be to thin of cable? And or to big of clamps? I know there is an arm that belongs under seat bracket I cant find.one? Uploaded with ImageShack.us[/url Uploaded with ImageShack.us Share this post Link to post Share on other sites
pumper.atv 26 #2 Posted May 29, 2011 Do You have the "saddle" on the main side of the cable? there is a an old saying "never saddle a dead horse :deadhorse:" Share this post Link to post Share on other sites
racinfool40 202 #3 Posted May 29, 2011 Pumper said what I was told never saddle dead horse turn you clamps around and tighten on the dead side.. meaning the side that doesn't carry the load..if you need the rock shaft for under the seat Contact Indy wh I know he has on to sell!!! :hide: Share this post Link to post Share on other sites
jasoncracer 0 #4 Posted May 29, 2011 This is temp I am buy pieces to.go around metal instead of.cable rubbing and yes the threads facing to.ground thats how it will be.done that what I mean. Share this post Link to post Share on other sites
