mrc 955 #1 Posted May 26, 2011 hi guys, can the dial-a-height feature be added to a 312-8? thank you. mike in mass. Share this post Link to post Share on other sites
Forest Road 594 #2 Posted May 26, 2011 I'm surprised you don't have it.... The holes should already be in place under the sheet metal covers. Share this post Link to post Share on other sites
dcrage 630 #3 Posted May 26, 2011 I remember Duff saying that he added one to one of his 312s Share this post Link to post Share on other sites
Indy w h 5 #4 Posted May 26, 2011 Yes it can be done!! And i happen to have an extra one if needed Indy Share this post Link to post Share on other sites
Kelly 1,033 #5 Posted May 26, 2011 I should have all the parts to add it to your tractor, send me a PM when your ready. Share this post Link to post Share on other sites
Butch 194 #6 Posted May 26, 2011 You can still order it through Toro. It comes with the lifting hardware and all new plates and decals for around $75. Share this post Link to post Share on other sites
Butch 194 #7 Posted May 26, 2011 I remember Duff saying that he added one to one of his 312s Duff bought his from Toro also. Well worth the money with all the goodies that were included. Share this post Link to post Share on other sites
Duff 206 #8 Posted May 26, 2011 I remember Duff saying that he added one to one of his 312s Duff bought his from Toro also. Well worth the money with all the goodies that were included. Yup, sure did! Actually got mine through Jack's Small Engines. They sent the first one minus some (non-essential) goodies in a sealed Toro package, so they called Toro who directed them to send me a whole second set-up for free and told me to keep everything! Just FYI, not all 312's have the lower dash plate and shift console cover predrilled for the dial-a-hite, but it's a real easy conversion with a Dremel tool and some touch-up paint. Duff :hide: Share this post Link to post Share on other sites
