Maintenance

[KyBlue 655]

Since Toro has let me down for the manuals, I'll post the couple ?'s that I have here for all the great WH minds to answer!

I need to change the Rear End Lube on my B80, what should it get refilled with, and how much?

Also where is the drain plug? And you refill thru the dipstick hole right?

Finally, Since the Lube in the axle looks like total :wtf: and the overall condition of the deck, and the rest of the tractor, Im going to say that it REALLY needs greased.

Where are the grease Points?

I figure that'll do it for now ..

[catman81056 3]

If I can do this right, try here.

http://f1.grp.yahoofs.com/v1/8EA7SEAJy4lK5...0Capacities.pdf

The drain plug should be towards the rear left side of the trany and possibly next to the hitch.

Try here also.

http://f1.grp.yahoofs.com/v1/AE87SFQU-8XUV...0C%20Models.pdf

[Confused99 2]

Not to get off topic but could someone post a link to a manual for my Raider 12? I have tried to find one without any luck.

Thanks in advance,

Jason

[WheelHorse_of_course 99]

Jason, since the Raider was made several years you need to post you vehcile number form the tag under the dash.

[Confused99 2]

Jason, since the Raider was made several years you need to post you vehcile number form the tag under the dash.

It is 1 6251 and the serial number is 662874.

Thanks,

Jason

[KyBlue 655]

neither of the links work. Thats my kinda luck right there.. :whistle:

[linen beige 15]

I need to change the Rear End Lube on my B80, what should it get refilled with, and how much?

Also where is the drain plug? And you refill thru the dipstick hole right?

Scott,

My lube recomendations and usage chart shows 2 qt.s of SAE 90-140 A.P.I. service GL-5 gear lube, with no service inteval recomendations. I think someone else has you covered on the drain plug location.

If the lube that's in it really looks BAD, I'd flush it out REALLY well before I used it much. Or better yet, open it up, wash it out, and replace any seals, etc. it might need.

[catman81056 3]

Scott I can try to send you a copy of the owners manuel for your tractor. The file size is 1.44megs. Let me know if you want it.

Well it covers;B-60,80,100 w/8spd

C-120 and C-160 w/8spd and auto

[KyBlue 655]

Yeah Tim, Id love to have a copy ...

Thanks!

Thanks Jim, it'll get changed now, and run for a bit, and then changed again after a couple weeks use.

[CasualObserver 3,411]

Scott...just a suggestion here... go back and take out your email address and then PM it to Tim.... you don't want to post things like that out in the searchable board text. (even in that form) The forums are prime pickings for spy/spambots.

[KyBlue 655]

Thanks for the heads up Jason - He got me the Manual this morning, Thanks a Ton Tim!!

[catman81056 3]

No prob Scott

I was just hoping it went thru!!