scv85 1 #1 Posted May 4, 2011 I recently picked up a loader from jdog and am looking to fabricate a subframe and add a pump to run it. I am pretty much set on the subframe, but I'm not sure where and how I want to attach the pump. This is a GT14 with horizontal pulley pto. Could someone take a picture of their pump setup on an Ark or custom loader so I can get some ideas please??? Share this post Link to post Share on other sites
Brrly1 1,146 #2 Posted May 4, 2011 Sean, I will take some pictures in the morning. I now have mine up and running (its not as if you didn't already know that). So I will get it out and take some pictures. I will be more than happy to post. :wh: Share this post Link to post Share on other sites
dodge78 90 #3 Posted May 4, 2011 from the manual. I had to make my own. It works. Share this post Link to post Share on other sites
wallfish 15,972 #4 Posted May 4, 2011 Here's my duel pump setup. Left is for the hoe and the right is the facory Ark pump Share this post Link to post Share on other sites
scv85 1 #5 Posted May 5, 2011 Thank you for the pictures, that gives me a better idea of what I should do. Brrly, I would love to see you setup on a GT14. I'm curious about the pump setup, the resevoir setup (height of inlet and outlet for fluid) and what you used for braces to the front of the machine. Share this post Link to post Share on other sites