Loader Pump Picture NEEDED

[scv85 1]

I recently picked up a loader from jdog and am looking to fabricate a subframe and add a pump to run it. I am pretty much set on the subframe, but I'm not sure where and how I want to attach the pump. This is a GT14 with horizontal pulley pto. Could someone take a picture of their pump setup on an Ark or custom loader so I can get some ideas please???

[Brrly1 1,146]

Sean, I will take some pictures in the morning. I now have mine up and running (its not as if you didn't already know that). So I will get it out and take some pictures. I will be more than happy to post.

:wh:

[dodge78 94]

from the manual.

I had to make my own. It works.

[wallfish 18,630]

Here's my duel pump setup. Left is for the hoe and the right is the facory Ark pump

[scv85 1]

Thank you for the pictures, that gives me a better idea of what I should do.

Brrly, I would love to see you setup on a GT14. I'm curious about the pump setup, the resevoir setup (height of inlet and outlet for fluid) and what you used for braces to the front of the machine.