Clevis Hitch

[case442 130]

Hi All,

I have a NOS clevis hitch that i'm considering putting on my 312-8 or C-101.

Does anyone have an installation diagram for my install?

Thank you, Mike (case442)

[racinfool40 202]

Not sure exactly what style you have?? Might try this one:

http://www.mywheelhorse.com/graphics/file/...18_810834RB.pdf

[Butch 194]

What are the differences between the Type A and Type B? Can they both be used on the same tractors?

Thanks.

[racinfool40 202]

HMMM Good question Butch!! Here's the other manual I found.. Not much different except for the rocker shaft.. this one mounts straight to the lift cable!!

http://www.mywheelhorse.com/graphics/file/...5511_803916.pdf

[case442 130]

Thank you Guys,

I think my is type A, but its definately older. I will look at it tommorrow.

Thank you, Mike

[daveoman1966 3,629]

This is a clevis hitch on my 414-8. The Slot hitch would hoop up the same way.

pf... I awlays use a BigAzz 'D' ring pull pin instead of the original pin with the circlips. Makes it much easier and faster to swap out hitches.

Attached Image

[daveoman1966 3,629]

Here is a 2nd pic of the clevis hitch hookup.

Attached Image

[tgranthamfd 28]

Not sure exactly what style you have?? Might try this one:

http://www.mywheelhorse.com/graphics/file/...18_810834RB.pdf

This should be the one you need for the 312-8 or the C-101. That is the manual I put on there after I bought a kit and put it on My 2005 Toro Wheel Horse 315-8 Classic GT. I also put my own pictures on here because some in the manual wasn't very close or clear. Only difference I could see from the links, was 1 looked to be for older C series (pre 78) and this link should be for 78 and newer. for sure though.