fdsinozich 1 #1 Posted April 20, 2011 The rod coming through the pulley box and to which the pulleys mount is at about a 45 degree angle going toward the back of the tractor. The pictures in the manual appear to show it straight out, making it match the pulleys on the PTO. Am I missing something, because the rod looks like it is supposed to be the way it is. Thanks, Frank Share this post Link to post Share on other sites
racinfool40 202 #2 Posted April 20, 2011 Thats the way it is suppose to be directs the belt to the center pulley on the mower deck!! :thumbs: Share this post Link to post Share on other sites
fdsinozich 1 #3 Posted April 20, 2011 Mike, Thanks. Do you know the # for the mower drive belt? It looked to me to be 102741, but that is too short. Thanks Frank Share this post Link to post Share on other sites
racinfool40 202 #4 Posted April 20, 2011 we need to know what tractor you have and what deck you are runnin under it..and hopefully no one has changed or modified anything.. Pics would be a great help!! :thumbs: Share this post Link to post Share on other sites
fdsinozich 1 #5 Posted April 20, 2011 C-120 Automatic 1-0495 42" deck 5-1010 I can't seem to get pics on here. Share this post Link to post Share on other sites
racinfool40 202 #6 Posted April 20, 2011 The belt should be a 7478 -- Gates#6984 and Napa # 5L840w by my search anyways!! a c-120 with a tecky??? Don't see them to often!! Share this post Link to post Share on other sites
fdsinozich 1 #7 Posted April 20, 2011 Thanks for the info. Frank Share this post Link to post Share on other sites
mcwh1950 2 #8 Posted April 20, 2011 Mike, Thanks. Do you know the # for the mower drive belt? It looked to me to be 102741, but that is too short. Thanks Frank Should be belt 102742. The 7478 belt is shorter than a 102741. 7478==== 84 x. 625 102741========= 89 x 5 102742------------------------------------- 103 x .5 Share this post Link to post Share on other sites
racinfool40 202 #9 Posted April 20, 2011 :thumbs: Thanks for catching that Smitty!!! Not the 1st time I have been wrong!! Don't know what I was thinkin!! Sorry Frank!!! Share this post Link to post Share on other sites
fdsinozich 1 #10 Posted April 21, 2011 Thanks, guys. My Dad always said that if you don't make a mistake now and then, you aren't doing anything. Share this post Link to post Share on other sites