wovennut 44 #1 Posted April 10, 2011 Does anyone have a picture or diagram of the routing of the drive belt on a charger 10 auto Share this post Link to post Share on other sites
Kelly 1,028 #2 Posted April 10, 2011 No picture but starting at the engine, around the pulley the bottom goes all the way back to the trans pulley up and around then over the idler pulley then to the engine, hope this helps. Share this post Link to post Share on other sites
wovennut 44 #3 Posted April 10, 2011 Does it go over or under the idler pulley? Share this post Link to post Share on other sites
daveoman1966 3,587 #4 Posted April 10, 2011 This is a C-120 and the belt routing is the same as the Chg 10. The blue belt is NOT a wheelhorse belt and is shown just for you. You shoudl use wheelhorse belt #7478 on the Charger 10 and I don't recommend anything but an OEM belt. Aftermakrket belts may be a little cheaper, but they aren't gemoetrically the same and will not last. Attached Image Share this post Link to post Share on other sites
Kelly 1,028 #5 Posted April 10, 2011 Sorry I went to bed shortly after posting lastnight, yes like Dave shows, just remember flat pulleys the back of the belt rides on it V pulleys the front of the belt runs in the V. Share this post Link to post Share on other sites
wovennut 44 #6 Posted April 11, 2011 greatly appreciated, thanks for the help Share this post Link to post Share on other sites
