Jump to content
Sign in to follow this  
KB9LOR

Need "O" ring info

Recommended Posts

KB9LOR

Need part # 9733 "O" ring for my hydraulic lift cylinder, it goes on the inlet and outlet hoses, anyone have the correct size they should be? Thanks!

Share this post


Link to post
Share on other sites
 
 
KB9LOR

Does anyone have the size "O" ring that goes on the hoses that go to the lift cylinder?

Share this post


Link to post
Share on other sites
 
Trouty56

Still a little blurry but maybe this will help....

Sticks are in focus.....lol

Looks to be 9/16 inch...1/16 inch thick.

oring.jpg

Share this post


Link to post
Share on other sites
 
KB9LOR

Thanks Bob, that is what I needed!!! much appreciated!

Share this post


Link to post
Share on other sites
 
KB9LOR

Okay lift hose leaking AGAIN!...does anyone have any of those "O" rings? the ones I have tried are either too thin or something, I have tried numerous amnufacturers to no avail, Parker, Cheapo's, you name it, all with NO luck! anyone???

P.S. Are they still available from TORO?

Share this post


Link to post
Share on other sites
 
JimD

I know IndyWH carries some hydraulic gasket and other parts, have you checked with him?

Share this post


Link to post
Share on other sites
 
Indy w h

Need part # 9733 "O" ring for my hydraulic lift cylinder, it goes on the inlet and outlet hoses, anyone have the correct size they should be? Thanks!

Does it leak when the engine is off ?? Or is it just an under pressure leak ??

Let me know !!

Indy

Share this post


Link to post
Share on other sites
 
KB9LOR

Need part # 9733 "O" ring for my hydraulic lift cylinder, it goes on the inlet and outlet hoses, anyone have the correct size they should be? Thanks!

Does it leak when the engine is off ?? Or is it just an under pressure leak ??

Let me know !!

Indy

It was leaking as it sat not running. before I took it out I noticed the deck had dropped down.

Share this post


Link to post
Share on other sites
 
Indy w h
Need part # 9733 "O" ring for my hydraulic lift cylinder, it goes on the inlet and outlet hoses, anyone have the correct size they should be?

Share this post


Link to post
Share on other sites
 
KB9LOR
Need part # 9733 "O" ring for my hydraulic lift cylinder, it goes on the inlet and outlet hoses, anyone have the correct size they should be?

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...