WHRNaddict 5 #1 Posted April 5, 2011 :wh: Looking for info, diagram, or pic's to correctly hook up the updraft carb linkage on my 550's H55B. I think the PO got frustrated and left a mess. I have a 6" and a 4 5/8" linkage, and a 5/8" compressed spring, I assume the 6" linkage goes between the govenor arm and the L shaped arm on the shroud. The 4 5/8" linkage is to long to go to the throttle control. I've studied this thing and can only guess from there. Checked older post and don't find any detailed info. Any help would be greatly appreciated. :thumbs: Share this post Link to post Share on other sites
puddlejumper 67 #2 Posted April 6, 2011 Great question!!!, Hopefully I will be needing same info in near future. :thumbs: Share this post Link to post Share on other sites
WHRNaddict 5 #3 Posted April 7, 2011 :wh: I know someones been down this road before me :thumbs: Share this post Link to post Share on other sites
MikesRJ 552 #4 Posted April 7, 2011 You might try PM'ing "Suburban550". Ray may have the pictures you need. :thumbs: Share this post Link to post Share on other sites