Forest Road 594 #1 Posted March 31, 2011 Looking for a little guidance here. I just picked up a GT2500 Anniversary Edition. I was going to sell it. But after looking at it the whole machine is in great shape. Are the chassis the same on the this and a 312-8? I'm considering dropping the Kohler and heavier duty 8-speed onto this chassis. And I prefer the look of a C-series. My 312 runs and works great. The sheet metal is rough. The floor boards are well rusted and bent. Any thoughts or suggestions are appreciated. Share this post Link to post Share on other sites
Duff 206 #2 Posted March 31, 2011 According to the Toro web site the frame numbers are different, (108128 for the GT2500; 110648 for the 312-8's)but that may simply have been a renumbering for different model years. I think I've read here that the C's, 300, 400 and 500 series tractors all shared the same basic frame. Others may have better information. Duff :thumbs: Share this post Link to post Share on other sites
Kelly 1,028 #3 Posted March 31, 2011 The trans will bolt right in, the engine will also, but you will have to do a bit of wiring, and not sure on the choke and throttle cable, but it should be a easy swap. Share this post Link to post Share on other sites