WH Raider10 17 #1 Posted March 27, 2011 Hi, I have a question: what type of drive belt do I need for my tiller so i can use it on my 312-8 from 1989, I guess. Are there different sizes in those belts? Could somebody give me the part number of the correct belt I need? Or maybe a link to a toro list? P-J Share this post Link to post Share on other sites
mcwh1950 2 #2 Posted March 27, 2011 P-j. Should be p/n 110265. Also from the picture you post in the other topic about you haul it look like the belt that is all worning out. Share this post Link to post Share on other sites
can whlvr 991 #3 Posted March 27, 2011 that particular belt is only available through toro Share this post Link to post Share on other sites
WH Raider10 17 #4 Posted March 28, 2011 Thanks mcwh1950! Are you sure it will fit my tiller? My tiller is from 1995. If it does I'll order the belt. I got 3 belts with my 312-8. One non wheelhorse,and all junk. one from wheelhorse in pieces and one very good. I'll take a pic of that one tomorow because I'm not sure it's for the tiller. :wh: Share this post Link to post Share on other sites
mcwh1950 2 #5 Posted March 28, 2011 P-J. Yes I'm sure your tiller belt is p/n 110265. It is 141 inch long by .5 If you go to the following web page put in 79370 for a model number and 3999999 for a serial number you will be able to down load a manual for it. https://lookup3.toro.com/request/request.cfm hope this help some. Share this post Link to post Share on other sites
WH Raider10 17 #6 Posted March 29, 2011 Thank you for the help! I appreciate it! :thumbs: Share this post Link to post Share on other sites