C.M.C-175 0 #1 Posted February 16, 2011 I need to remove the hydro transmission from my C-175, so that I can take a closer look at a few things. I was looking at the exploded parts diagrams that I have and it looks like there are only four bolts that attach the rear transaxle and pump assembly to the frame... is this correct, or am I missing something? I know that I will need to disconnect the hydraulic lines for the lift and disconnect the linkage for the speed lever. It's a Sundstrand hydro, is that really all there is to removing it??? :thumbs: Share this post Link to post Share on other sites
B-8074 19 #2 Posted February 16, 2011 yep. :thumbs: Share this post Link to post Share on other sites
Kelly 1,028 #3 Posted February 16, 2011 Well basicly, don't forget the drive belt, and that means the belt guard, the fenders and fuel tank, ect...... little more than the 4 bolts and the linkage. Share this post Link to post Share on other sites
C.M.C-175 0 #4 Posted February 16, 2011 Alright, cool... Thanks for the info guys! :thumbs: Share this post Link to post Share on other sites