clintonnut 126 #1 Posted February 14, 2011 I do not have a single regulator out of 4 or 6 that work. Most of them just one day didn't put a charge on the meter. I would clean the contacts and still nothing. These are the delco remy s/g regulators. Charlie Share this post Link to post Share on other sites
MikesRJ 555 #2 Posted February 14, 2011 Did you check the ground from the regulator case to the engine? Try a wire and two alligator clips connected between a regulator cooling fins (clean and area) and a good engine ground point. See if that makes a difference. Share this post Link to post Share on other sites
sorekiwi 761 #3 Posted February 14, 2011 Did you check the ground from the regulator case to the engine? Try a wire and two alligator clips connected between a regulator cooling fins (clean and area) and a good engine ground point. See if that makes a difference. He's talking starter/generator regulators Mike. They do still need to be grounded I think. Seems like one out of 4 should work though, are you sure you havent got a bad generator or wire? Share this post Link to post Share on other sites
Gene_S 93 #5 Posted February 14, 2011 What is the output of the generator to your regulator Charlie? Share this post Link to post Share on other sites