Retired Wrencher 4,895 #1 Posted February 13, 2011 :thumbs: Hi I just got a heat gun from Harbor Fright. Model #97114 it has multiple settings on it or heat ranges. I had a thought that if heat could take off old decals u could reuse them on working tractors, if they had none. I mean even a worker can look good. it work great just take your time when taking it off. and I use 3MM super 77 Adhesive to stick it back on. I hope you enjoy this post. T/C Gary B. MODERATORS CAN U LEAVE HERE FOR A LITTLE WHILE BECAUSE OF NEWBIES. SO THEY CAN SEE IT. T/U Share this post Link to post Share on other sites
64s 83 #2 Posted February 13, 2011 If possible, heat the decals from the back side to remove them. Also, do it with the lowest possible setting, you can quickly ruin a decal (or cause it to discolor). Good luck! Share this post Link to post Share on other sites
Retired Wrencher 4,895 #3 Posted February 13, 2011 thank you George but these where old decals had a lot of scratches on them and scrapes.I just thought I would spruce up the the old Girl. Pics are coming when the glue dries Share this post Link to post Share on other sites