Single Stage Snowthrower parts needed

[nekovt 0]

Help!

My only snow thrower just "stopped" the other day. I started to take it apart and found that one of the cog wheels on the chain drive just seized up.

I ended up finding that the bearings on the back of the snow thrower are bad also. I tried to get the pully off and bent it up pretty good (It's been rusted on there for over 30 years!).

I was wonder if anyone had parts for a 42 in single stage snow thrower.

I need: The 2 bearings on the back on the blower (The long shaft goes through to the pully), 1 pully and one (Preferably both cog wheels that the chain rides on).

I'm freaking out because we've got snow falling and this was my only blower. If you've got parts I could really use them

Thanks!

Brad

[Kelly 1,033]

All the parts you need can be bought new at TSC or many other farm stores, the idler sprockets are about $17 the bearings are about $17 also, the pulley will be a bit tougher to find not all stores carry that size but ask they may be able to order it for you.

[Forest Road 594]

As far as the pulley goes just get something close. 1/2" or an inch smaller will just speed up your blower. And then chuck the stuff that much further. Good luck.

[JonW 0]

All the parts you need can be bought new at TSC or many other farm stores, the idler sprockets are about $17 the bearings are about $17 also, the pulley will be a bit tougher to find not all stores carry that size but ask they may be able to order it for you.

Kelly do you have the TSC part numbers?

I am fighting the drive sprocket's two set screws.

As like others found out the set screws are frozen and I can't get them out.

PB Blaster, heat(propane) and ez out isn't working.