redtin 0 #1 Posted February 4, 2011 Dan UK 416-8 Hi All new to this great forum. This is my fabrication of the hitch i made to fit the plough do not know the make of it but it's heavy not had a good test yet as to the poor weather. been poor. Share this post Link to post Share on other sites
farmer 1,075 #2 Posted February 4, 2011 Hello and Redtin, Dan nice to see some winter ploughing.....without snow spring must be just around the corner. I turned in an area of my plot a few days ago, makes getting a seed bed easier later on. Interesting hitch you've made up, if it works for you thats the main thing, nice also :thumbs: Share this post Link to post Share on other sites
redtin 0 #3 Posted February 4, 2011 Thanks Rex just been viewing your vid must be good cam very clear nice work we only had small amount of snow hear in Cornwall just west of Helston but that darn east wind just was relentless. Dan Share this post Link to post Share on other sites
farmer 1,075 #4 Posted February 4, 2011 One thing Dan, I can't tell from your picture, but make sure the pin that goes through the trans is a good fit. You dont what to break that casting Have you got any more attachments? Share this post Link to post Share on other sites
redtin 0 #5 Posted February 4, 2011 Yes Rex I was thinking that I have a better fit pin but its not perfect it seems a lot of strain on that cast hope it will hold out or I will regret it. also have a riger and cultivator from a two wheel tractor thats how I also connect them. Dan Share this post Link to post Share on other sites
can whlvr 991 #6 Posted February 5, 2011 :thumbs: nice job on that hitch Share this post Link to post Share on other sites
