hoppy 0 #1 Posted January 26, 2011 i got this motor off ebay and parts tree shows nothing for it.............tag reads. Manu#143-566022 SN#6066 04503. Has a float bowl carb on it that i need to rebuild and there are 50 differant kits #'s for H60's although they look the same.\ can anyone help me identify this motor and the carb kit # i would need for rebuild? i want the complete kit with seal, welch plugs, needles, etc. id like OEM tecumseh parts also. Share this post Link to post Share on other sites
Sparky-(Admin) 19,652 #2 Posted January 26, 2011 The Manufacturers number is a Sears #. I would try a Sears site . Mike....... Share this post Link to post Share on other sites
Sparky-(Admin) 19,652 #3 Posted January 26, 2011 Did some snooping. Go here, http://www.searspartsdirect.com/partsdirec...rl_id=104597546 , and enter your manufacturers # . Mike......... Share this post Link to post Share on other sites
KB9LOR 4 #4 Posted January 26, 2011 Decent price on that Carb kit too! Share this post Link to post Share on other sites
hoppy 0 #5 Posted January 26, 2011 the bottom of the bowl says "Lauson-Power Products". numbers stamped in the carb are 113 6324. thats all i got. any ideas? Share this post Link to post Share on other sites
KB9LOR 4 #6 Posted January 26, 2011 the bottom of the bowl says "Lauson-Power Products". numbers stamped in the carb are 113 6324. thats all i got. any ideas? Go to the above site on sparky's post above, (clink the link) and in the search bar when the site comes up, type in your Manufacture number 143-566022, it will come up with 4 pics, pick the carb diagram then scroll down, and you will see the carb kit for it, about 23.00 bucks. Share this post Link to post Share on other sites
TT-(Moderator) 1,128 #7 Posted January 26, 2011 OR......... You can get it here (aftermarket) : TEWarehouse or here (OEM) : Milford Power Equipment or at your local Tecumseh dealer under P/N 31840 :banghead: Share this post Link to post Share on other sites
hoppy 0 #8 Posted January 26, 2011 thanks fellas! wow that was quick work! :banghead: Share this post Link to post Share on other sites
