GT14 and d series 3 point hitch

[Lawn Ranger kid 14]

Can any of the GT-14 3 point hitch parts be used on a d-160.

Thanks Josh

[bitten 133]

I have read that they are different. If you have GT-14 3 point and want to get rid of it I might be interested in it. Just let me know.

Thanks, P.J.

[tommy3horse 3]

Me too!

Tom

:banghead:

[Kelly 1,028]

I have a complete D 3 point I'd trade, if yours will fit my C-195.

[refracman 166]

A little tutorial on the 3pt parts interchange

Upper arms - Specific to each tractor with the GT14 and D's useing 1" bar stock with 3/8s flat stock. The C195 uses 1 1/8 bar stock with 3/8s flat stock.

Trunions on upper arms- Gt14 5/8" and the D/C195 are 3/4"

Lift links - The GT14 are specific to it and the D's/ C195 are the same.

Lower arms- There are 2 different widths but lenths are the same and will interchange between them all 3.

Swing chains and clevis'- GT14 are shorter but all use the same clevis.

Mounting pins- all are 1/2 dia, Gt14 are shorter than the D/195.

Center link all the same

Hope this helps.

[Kelly 1,028]

Steve do you have the upper rock shaft for a C-195?? I'd like to put the 3 point on it from my D

[fireman 1,021]

Kelly that is still available from Toro. Of course it's like $270 :banghead: