jimbotelho 1 #1 Posted January 5, 2011 Hi all, I was helping uncle bo today install his plow on his 520 he bought from a member .The clearance with the blade in the upright position was only about 4inches from the ground and it was just hitting the tie rods. After looking at it Im not sure if the tie rods are installed properly .It has a swept front end and before experiminating with it are the nuts (mounting) supposed to face upward on top of the mounting surface or are they supposed to face down .Anybody know? Thanks Jim Bo :ROTF: Share this post Link to post Share on other sites
TT-(Moderator) 1,128 #2 Posted January 5, 2011 The grease fittings were on the top on my 520, so the nuts have to be on the bottom. Share this post Link to post Share on other sites
jimbotelho 1 #3 Posted January 5, 2011 thanks terry it looks like tthe rods will be level rather than slanted to the ground if you know what I am trying to say Share this post Link to post Share on other sites
