HorseFixer 2,013 #1 Posted December 5, 2010 On the right side of my 06-44SC01 Blower there is a lift spring Part # 4629 I didn't feel like paying a $30.00 bill for one so I used a trampoline spring. This spring levels up the right side of the blower as the lift picks up more of the left side. I took two washers and Tig Welded to the hooks on the spring to keep them on the spring support rods. If you weld the spring hooks to a washer make sure you wrap a wet rag on the spring to keep the heat off as not to remove the tempering of the spring. This Trampoline spring levels the blower up better than the original! It also looks kinda cool being it is tapered Share this post Link to post Share on other sites
d180man 5 #2 Posted December 5, 2010 Hi duke very nice job ! looks great !!! :D Share this post Link to post Share on other sites
bitten 134 #3 Posted December 5, 2010 Its amazing that that little spring would do anything with the heavy blower. But I guess that it just needs a little help. Nice mod :ychain: Share this post Link to post Share on other sites
Butch 194 #4 Posted December 5, 2010 You da man Duke! :ychain: Share this post Link to post Share on other sites
AMC RULES 37,196 #5 Posted December 5, 2010 Fabbed up to look better than factory. Nice work indeed. Share this post Link to post Share on other sites
Shuboxlover 480 #6 Posted December 5, 2010 I hope this doesn't sound....ummmm.....weird, but MAN I LOVE YOUR UNIT!!!!!!!!!!!!!!!!! I want one of those 2 stage blowers so bad I can taste it!!!!!!!!! Share this post Link to post Share on other sites
Forest Road 594 #7 Posted December 5, 2010 I hope this doesn't sound....ummmm.....weird, but MAN I LOVE YOUR UNIT!!!!!!!!!!!!!!!!! OOOOh OOOh pic me pic me!!!! Ummmmm if we didn't know what you were referring too. It would. But nice job!!! Share this post Link to post Share on other sites