ftlboy717 0 #1 Posted December 3, 2010 hey every one i have a raider 12 with a 14 hp kohler on it i just orderd my pto but the main drive pully i have is not the right one i dont think i need a spacer or something because when i put my pto clutch on the one with four bolt holes it hits my belt gaurd,does any one have any info on all the parts i need and how every thing works? this is what i have right now i also have the pto itself but need a spacer or something Share this post Link to post Share on other sites
racinfool40 203 #2 Posted December 3, 2010 Pm sent and look at this link: http://www.mywheelhorse.com/graphics/file/...3112_803926.pdf Hope this helps!!along with the pulley I have this is the correct set-up Share this post Link to post Share on other sites
ftlboy717 0 #3 Posted December 4, 2010 yea that helps out alot but do i have the right pully on there now? when i try to put my clutch on here it rubs the belt guard,is there a spacer or something? Share this post Link to post Share on other sites
racinfool40 203 #4 Posted December 4, 2010 sent you a PM with pics of the right pulley and you can see the space you need in between the pulley and the friction disc for your belt guard to work right..MIKE Share this post Link to post Share on other sites
racinfool40 203 #5 Posted December 4, 2010 here's the pics of the right pulley: Share this post Link to post Share on other sites
Anglo Traction 761 #6 Posted December 4, 2010 ftlboy717...check your duplicated post further down in this forum for additional information. Regards Share this post Link to post Share on other sites
