replacement snowblower idler sprockets

[Horse Fanatic 51]

I need new idler sprockets (Toro 93-1614) for my 42" single stage SB.

They are fairly pricey, has anyone found a suitable aftermarket replacement?

Or anyone have good used ones?

Thanks,

Glenn

[wallfish 18,087]

I don't know the size but they sell them here

Surplus Center

[Woodsman 3]

I live in WI and just replaced both of my idler sprokets with ones I found at Fleet Farm These were half the cost of OEM. You could try an implement dealer for something similar.

[Forest Road 594]

Hardware stores and small engine shops usually have pulleys available. There's nothing unique about them.

[Horse Fanatic 51]

I finally found some. 17 tooth ones seem pretty plentiful and probably would have worked, but the snowblower came with 18 tooth idler sprockets.

I got some 18 tooth ones from Cookssaw.com, about $14 each and $5 shipping. My local Toro dealer wanted $32 each and parts tree was $27 (plus shipping). So assuming these aren't cheap junk, it was a good deal.

Thanks.