Kelly 1,028 #1 Posted November 15, 2010 I bought this C-195 it's kinda ruff, has 1200 hours on it, orig. KT19 runs good puffs a little smoke but not bad only when starting and working it, trans feels good kinda slow compared to my other hydro tractors, I'll look it to linkage adjustments later, it came with 2 tillers, 2 snowblowers, a heavy duty homemade snow plow, extra tires, I forgot to pull the model no. so I'm not sure what year it is, I've wanted one of these for a while but most are to far away or to much money, I'll sell the tillers and snowblowers to get a few bucks back, I have a question for those that have these, Will a D series 3 point fit them?? I know it will not be a direct fit but what do I need to make or change to put it on? I have a D I'm parting out and I've been hanging on to the 3 point. not pretty but seems solid steering is good, trans responsive, runs good, I sold a Nice C-145 tonight that if I didn't sell it, I would have swapped the sheet metal it was very clean, but that sale helped fund this buy, I do have a good plastic fender to swap on to this. Swaped the tires Share this post Link to post Share on other sites
racinfool40 202 #2 Posted November 15, 2010 :thumbs: looks like a good find Kelly Looks like trailer is working out good keep me in mind for a tiller when you get time.. And that c-161 I got from you working out great!!!! Share this post Link to post Share on other sites
Sparky-(Admin) 19,580 #3 Posted November 15, 2010 So whats the plans for this one Kelly? Fresh paint and a restore? I know you want to ! Mike............ Share this post Link to post Share on other sites
wheelhorsec85 5 #4 Posted November 15, 2010 WOW THAT DOES NOT LOOK ROUGH AT ALL . you should have seen the one i got about a year ago :) Share this post Link to post Share on other sites
Rollerman 290 #5 Posted November 15, 2010 Nice score Kelly. I agree....would like one too, but either to far or to much $$. I believe the 3 point will bolt right on? Bearpath or C-Series14 would probably know better. Share this post Link to post Share on other sites
mowerman1193 29 #6 Posted November 15, 2010 Nice find Kelly, Maybe one day I will be able to own one of those..Always like the C - 195's.. Kevin Share this post Link to post Share on other sites
C-Series14 15 #7 Posted November 15, 2010 I just happened to do this on mine. The arms, pillow blocks, and cylinder will work. You need the upper rockshaft for a C-195 because the D-Series one is different. You also need the mount for the top link...I think, never tried to put one on mine or remember if I did, it might be too wide or not wide enough, you will have to see if it fits. If you want to put a rear PTO on it, you WILL need a C-195 mount because it is cut different to allow the PTO output shaft to work. The upper rock shaft is still available...last I checked. Could be made though... Share this post Link to post Share on other sites
harleyjj 2 #8 Posted November 15, 2010 Kelly, Let me know what you want for one of the tillers Share this post Link to post Share on other sites
C-Series14 15 #9 Posted November 15, 2010 Tractor is a 1982-1983 because hydraulic levers behind LEFT leg... Share this post Link to post Share on other sites
bustedglass 1 #10 Posted November 15, 2010 Nice find Kelly. Good luck with the 3 point . Share this post Link to post Share on other sites
marvairplanes 34 #11 Posted November 15, 2010 Series14 Posted on Today at 11:25 am Tractor is a 1982-1983 because hydraulic levers behind right leg... But only if you are sitting on the seat "backwards"... Marv NW Oh Share this post Link to post Share on other sites
C-Series14 15 #12 Posted November 16, 2010 Well hog wash...you caught me! I will fix it... Thanks Marv Share this post Link to post Share on other sites
baerpath 517 #13 Posted November 16, 2010 righty-tighty, lefty loosey :thumbs: Share this post Link to post Share on other sites
C-Series14 15 #14 Posted November 16, 2010 righty-tighty, lefty loosey :) Share this post Link to post Share on other sites
perry 82 #15 Posted November 16, 2010 i might have a better hood for it. Share this post Link to post Share on other sites
dgoyette 12 #16 Posted November 17, 2010 Doesn't look too bad at all. What a great all around tractor that C-195 is. Share this post Link to post Share on other sites
boatman 3 #18 Posted November 19, 2010 :thumbs: Hi Kelly, Thats a nice find there. I had a c-125 I bought new in 1982 and just sold this year. Always liked the c=195. Looking forward to seeing pictures when you get it all dolled up. Have fun Share this post Link to post Share on other sites
TerryJW 0 #19 Posted November 19, 2010 :thumbs: Nice one Kelly Share this post Link to post Share on other sites