Snow Blower identification?

[multihobbyguy 35]

Hello, I acquired this snow blower at the Wheel Horse Show and I was wondering what the model number is and what it might fit. I have posted some pictures below. As always thanks in advance, Chris.

[Lane Ranger 11,395]

Your snowthrower looks a lot like an ST-324 to me.

[gwest_ca-(File Mod) 11,471]

A-64067 is a 1964 serial number.

Garry

[B-8074 20]

I agree with lane ranger. I have one just like it and asked the same question.

[littleredrider 409]

Looks more like the 6-2211 than the ranger. If you look at where it mounts to the tractor, it tilts up. Rangers are straight.

[dgoyette 12]

Agree it could be a ST-324 or an ST-326. Like littleredrider said it is not the Lawn Ranger model which was STR-324.

I am not sure what the differences between the ST-324 and the ST-326 were.

[gwest_ca-(File Mod) 11,471]

I am not sure what the differences between the ST-324 and the ST-326 were.

The difference is 2 years. The 1965 model was ST-325.

Garry

[dgoyette 12]

I am not sure what the differences between the

[multihobbyguy 35]

Thanks for the replies. That is neat that it is a 1964. That will be a nice piece to keep with my 704. I pulled up a ST-324 manual and so far it looks identical. Once again, Thanks to everyone for taking the time to answer more questions. Chris.

[dwayneGT 6]

I have the opportunity to buy a blower just like the one Lane Ranger pictured for $150.00 and it looks to be in good shape. What are the chances I can get it to fit on my GT1142

[dwayneGT 6]

Here is a picture of it

Attached Image

[Lane Ranger 11,395]

Dwayne:

That boxed turn handle for the chute makes me thing this is not a ST-324 or later model . It must be a bidder snowthrower and the bigger is more likely to go on your GT model Wheel Horse without a lot of modification.

Now thats from what I can see in the photo.

:thumbs: