Good quality seat time today

[nylyon-(Admin) 7,882]

It was so nice today, I decided it was time for the first official lawn cutting. First up was the 414-8 with the side discharge. As usual, it started right up and mowed excellent. For the trim up work, the 416 with the recycler oh how I love that tractor. All the time, I was thinking that I can't wait to give the lawn a little C-160 time too. No pictures today, maybe tomorrow I have to clean these guys up, don't want to show anyone dirty tractors :whistle:

[MaineDad 87]

Sure rub it in :whistle:

[Sparky-(Admin) 23,170]

My yards in limbo. No snow stickin around, and no grass growing .

Mike...........

[kj4kicks 154]

Feels good getting outside, doesn't it Karl ?

Having a little C160 anxiety ?

Don't worry, I got to see it today... LOL

Gave it a little sunlight today while I was out mowing, again.

[Stigian 1,234]

I did my 3rd or is 4th cut of the year yesterday, well half of a cut, finish it today if the rain stays away

I also did a bit of trimming along the bank of the stream

It may not look to be at much of an angle, but with the stream bank dropping away sharply 2 feet from where i was cutting, it was quite scary

[T-Mo-(Moderator) 4,610]

Karl,

Pics of dirty horses are good also. That way we catch them in "work" mode.

Ian,

Man, that is a heavy patch to cut. Be sure you know where that bank is. :whistle:

[nylyon-(Admin) 7,882]

I can't post pictures of a dirty 416-H, not after seeing Eldon's freshly painted 416, I got some waxing to do........

Eldon, yep I'm looking forward to the C-160. I enjoied running around on the C-120, except the smoke and rod noise made me nervous so I had to stop. It'll be really great to get on a good running C-160 to mess around on.

[mailman 1]

Hey Karl,

It just occured to me that Eldon can enjoy your tractor AND mine!

I am just about to put the mower deck on my 315-8 Classic and was thinking about what I could do with the C-100 Eldon is holding for me.

I'm sure you are about as anxious to get your hands on the C-160 as I am to get on the C-100.

Oh well, as they say.......Patience is a virtue.

And yep, lets see those pics. ....dirty or not.

Eric

[Stigian 1,234]

Ian,

Man, that is a heavy patch to cut. Be sure you know where that bank is.

Dont worry Terry, the edge of the bank is a few feet away from where i was cutting

I also only cut one tractor width of nettle down, the thought of cutting a second width that close to water was enough to scare me off doing it :D