Pollack Pete 2,273 #1 Posted October 29, 2010 The squaw and I took a quick road trip last night and came home with another GT 14.This one is a 1971.It's got a rough paint job,but good enough for a worker.I think the rear tires are loaded.It pushes real hard even with the tow valve open. It's missing the cast aluminum air cleaner elbow.Anyone here got a spare one they want to sell?Engine smokes real bad.Previous owner says the engine was rebuilt and cylinder bored 10 over,but standard size rings were put in?? I'll have to pull it apart and check.I may put a snow blower on this one.Anybody know which blower will fit? Share this post Link to post Share on other sites
wheelhorsec85 5 #2 Posted October 29, 2010 HAY I GOT A ELBOW FOR YOU . email me off site here at tcof805365@comcast.net jeff Share this post Link to post Share on other sites
neil 2,398 #3 Posted October 30, 2010 I have a gt14 also and as far as i am aware all implements made buy wheel horse for the gt14 were only made for that tractor so non of the other models attatchmnts will fit the gt14 Share this post Link to post Share on other sites
bitten 133 #4 Posted October 30, 2010 Snow thrower 6-9121, 6-9122,6-6212,6-6211 and 6-6213 are some that will work. Some of these are listed for other tractors, so other throwers might work. Share this post Link to post Share on other sites
