AMC RULES 36,945 #1 Posted October 24, 2010 Got lots of attachments with my new 520-H purchase, one of them being the pictured snowblower which I got hooked up yesterday. Everything is functional and works as it should but I see there is no bracket to hold the chute direction control rod in place. There should be a bracket that mounts somewhere on the side of the tractor to enable the operator to change the snow chute direction from the seat, correct? As pictured, I got nothing here, see no place where it would mount up even? Anyone have a picture of the bracket I'm missing and its location on the machine? How about a source for said bracket too? Thanks much. Share this post Link to post Share on other sites
C-Series14 15 #2 Posted October 24, 2010 There is a rod that mounts into the mid tach-a-matic that comes up along side the PTO and the control rod goes thru it. on't have a pic but might be a pic of one in the attachments gallery or someone else will come along with a pic... Share this post Link to post Share on other sites
TT-(Moderator) 1,128 #3 Posted October 24, 2010 The 78-0200-01 support rod is still available from Toro @ somewhere around $70 - depending on where / who you get from. This is the best pic I have: Share this post Link to post Share on other sites
AMC RULES 36,945 #4 Posted October 24, 2010 Thanks for the help guys, with your help I found the support bar. Had no idea what it was for. Once again, RedSquare made it happen. :wh: Share this post Link to post Share on other sites
