Aluminum fuel pump... (REBUILD KIT)

[horseheadhunter 17]

Hello !! Can anyone tell me if there is a rebuild kit for the aluminum bodied fuel pumps & if so where can I buy one at ? I'm trying to rebuild two that are the pulse/vacum type not with the mechanical arm that rides on the cam...any info would be greatly appreciated !! Thank's ~Shawn~

[jusjeepn 59]

Shawn, If its the Tecumseh type aluminum body, the kit is NLA. I have been able to find them on ebay from time to time, but I have not been able to order them for at least a year now. A model number of the pump and the engine it is on would help!

[horseheadhunter 17]

Sorry !! I forgot to post that they are both on K-181 Kohler motors. ~Shawn~

[CasualObserver 3,411]

What you need can be found in this post. http://www.wheelhorseforum.com/index.php?showtopic=17321 :)

[squonk 44,600]

http://www.wheelhorseforum.com/index.php?showtopic=20173

or

http://www.wheelhorseforum.com/index.php?showtopic=19171

Mike did the pump for my K161. Works great :)

[JUSS10 250]

i just rebuild them with a small piece of rubber. it seems as though its always the diaphragm that goes out on mine so i just pull the old one out, trace it on a new piece of rubber then cut and install. worked every time so far.

[buckrancher 2,695]

I make the correct size diaphragm for the pulse pump

.015 thick material send me a pm for price

Brian

[horseheadhunter 17]

Thank's Guy's !! I found a rebuild kit & should be back up & running in a day or so when I get to it ... ~Shawn~