Lawn Ranger -gas tank grommet

[Lane Ranger 11,681]

I am looking for a repalcement grommet to go on a couple Lawn Rangers and wondered if anyone has a source for something similar to the old rubber grommet (Part No. 2767 in the 1967 Lawn Ranger manual/IPL list) which is listed as a 2 1/2 inch rubber grommet.

I don't need an original but soemthing similar from a new source.

I saw these listed on the web and they look like they may work:

http://cableorganizer.com/grommet/rpd-grommets.htm

Any assistance would be appreciated!

I have been looking for a source for a while.

:)

[TT-(Moderator) 1,169]

You will find that the rubber grommets like those are much thicker than the originals used around the filler neck.

That doesn't mean that they won't work, but they may interfere in the removal of the cap, etc.

Here's another source: Heyco G1423 grommet

[Retired Wrencher 6,184]

:) Lane u can not find these in a hardware store or tractor supply?? I have seen them. Gary B.....

[Lane Ranger 11,681]

Thanks TT!

I have puchased H60 3 amp diodes from Mouser to make replacement rectifer boards for the Tecumseh H-60 motors!

Lots of good stuff in the Mouser Company Catalog.

I appreciate this information !

:)

[HankB 16]

If that's the one I think it is, the cheapest source I've heard of is a John Deere dealer. :)