C-141 with snow plow

[1962adrian 0]

Hello from Holland, recently bought this C-141 , it is made/ assembled in Belgium, 30 years old and still running smooth, build a subframe for it and attached a home built snow plow for it, still need some snowchains for it, than let the snow fall (if any!) Cheers,Ad

[Trouty56 567]

What kind of subframe did you build? I'd like to see how you connected it up. Is that a light above the plow?? Gives you light where you need it.

Nice driveway too!!

[Retired Wrencher 5,792]

:) HI 1962 nice tractor I have in the auto form these are a beast. I only use it for plowing my self. you will get a work out with out the power lift though?? unless u used light materiel. Well it looks like a fine worker enjoy it and T/Care Gary B.....

[Retired Wrencher 5,792]

oops sorry about the flag 1962

[1962adrian 0]

Hi, here a picture of the subframe and the lift system , its manual, using the lift lever. The tractor came with a mower deck, (heavy!) it caused tears in the metal plating around the lift-lever shaft bushing. I welded the bushing in place, so no more play there. Thanks for the comments!, Ad

[wh1257 226]

:) hello i'm from belgium this tractor tays for long time of marktplaats and :)

[The Toolman 22]

Looks like a helluva nice job to me....

[stevasaurus 23,281]

Well done Adrian...we are ready for snow. :USA:

[racinfool40 203]

:) I'd say great job on the fab.And looks like a great little worker!!

[Duff 206]

Adrian, that's a beautiful job of fabrication. Nice work!

Duff :wh:

[jusjeepn 59]

I like your spring assisted lift. This setup looks a lot like how the vert shaft machines are set up, except for the cantilever lift set up! Very nicely done! :)

[hm12460 53]

looks like a well thought out and engineered lift. how hard is it to lift? your craftsmanship is excellent.

[bustedglass 1]

Nice tractor and plow. Good job on the mounting fabrication. Thank you for sharing .