papaglide 541 #1 Posted September 2, 2010 Could anyone please provide a drawing or description of how to attach the hood hinges on my GT 14. I checked the Toro site and the parts look up doesn't cover the hood. thanks Share this post Link to post Share on other sites
Brrly1 1,146 #2 Posted September 2, 2010 Mike there are no hinges on a 69' GT14. Only small latches( I think thats what I want to call them) small pieces of metal that go around the tower, the hood slides in place with these latches sliding underneath of the steering tower There are four differnt pieces of metal one on each side and two across the top. Then you latch the hood down with the front hood latch locking it down to the front grille . I hope this makes sense. See Ya, Bye Burly :USA: Share this post Link to post Share on other sites
MikesRJ 552 #3 Posted September 2, 2010 Here's the IPL if that helps: http://www.mywheelhorse.com/graphics/file/...7453_A-5255.pdf Share this post Link to post Share on other sites
Brrly1 1,146 #4 Posted September 2, 2010 Mike, thats for 70' thru 73' I believe. The model # for 69' is 1-7441 if I remember correctly. Two different types of setups. See Ya, Bye Burly :USA: Share this post Link to post Share on other sites
MikesRJ 552 #5 Posted September 2, 2010 Actually, upon rechecking my info, that parts manual (form number A-5255) is for '70 and '72 ONLY. Thanks for catching that. Here's the entire model line info I have: 1-7441 1969 GT-14 Tractor OM: A-5235 IPL: 416-PL 1-7451 1970 GT-14 Tractor OM: A-5235 IPL: 1-7451 1-7452 1970 GT-14 Tractor OM: A-5235 IPL: A-5255 1-7453 1970 GT-14 Tractor OM: A-5235 IPL: A-5255 1-0500 1971 GT-14 Tractor OM: A-5235 IPL: A-7500 1-0501 1971 GT-14 Tractor OM: A-5235 IPL: A-7500 1-0502 1972 GT-14 Tractor OM: A-5235 IPL: A-5255 1-0503 1972 GT-14 Tractor OM: A-5235 IPL: A-5255 Share this post Link to post Share on other sites
papaglide 541 #6 Posted September 2, 2010 Thanks guys. In my case, having a 1969 there are no hinges. My hood has the tabs that John was speaking about. What to do now with the that I have hinges? Share this post Link to post Share on other sites
fireman 1,021 #7 Posted September 3, 2010 Mike, I found the ipl and drawing for the 69' on the Miliaca web site. It shows the little bars and clips. Share this post Link to post Share on other sites
Brrly1 1,146 #8 Posted September 3, 2010 Mike, I will snap a couple pictures tomorrow evening after I get off of work. The tabs have actually been welded to the hood itself. I don't think brazing will work but it might be a possibilty. See Ya, Bye Burly :USA: Share this post Link to post Share on other sites
fireman 1,021 #9 Posted September 4, 2010 Here is an exploded image showing the 69' Share this post Link to post Share on other sites
Brrly1 1,146 #10 Posted September 4, 2010 Well Mike all I can say is better late than not at all. I apoligize for taking so long in getting back to you. I took a couple pictures so I hope this looks ok or at least where you can see where the tabs are. See Ya, Bye Burly Share this post Link to post Share on other sites