Schnacke Recoil

[rmaynard 16,301]

I have a nice Schnacke recoil starter that I need to identify what engine it will fit on.

Here are the dimensions:

Mounting flange is 6" in diameter.

There are 8 mounting holes spaced 2-1/8" apart, center to center.

Screen housing is approximately 5" in diameter and is 1-1/4" high.

The recoil housing is 1" high.

The inside has a throwout mechanism as pictured below:

As you can see, the starter has been thoroughly cleaned, lubricated, and is ready to paint. The pull handle has been replaced, as well as the wire rope.

I need to know what I have here, and what engines this will fit.

Bob

[VinsRJ 723]

That Schnacke is for a Kohler K90-91.

If you have any thoughts of selling it please let me know. :)