horse junkie 18 #1 Posted August 1, 2010 I have a 67 1077 it goes fine on flat ground but won,t pull the slightest grade even at full throttle . Any help would be greatly appreciated Tim Share this post Link to post Share on other sites
rickv1957 70 #2 Posted August 2, 2010 Is your tow valve closed tight,Rick Share this post Link to post Share on other sites
Ken B 3,116 #3 Posted August 2, 2010 Is the belt good? My Electro was fine on flat ground but it wouldn't pull a hill well till I replaced the belt. Share this post Link to post Share on other sites
perry 82 #4 Posted August 2, 2010 Is the belt good? My Electro was fine on flat ground but it wouldn't pull a hill well till I replaced the belt. check belt and tow valve. but also check the drive pulleys and hubs for bad or loose keyways. ive seen drive pulleys on the trans shear a keyway but still move on flat ground. let us know what you find out. Share this post Link to post Share on other sites
horse junkie 18 #5 Posted August 7, 2010 Is the belt good? My Electro was fine on flat ground but it wouldn't pull a hill well till I replaced the belt. check belt and tow valve. but also check the drive pulleys and hubs for bad or loose keyways. ive seen drive pulleys on the trans shear a keyway but still move on flat ground. let us know what you find out. 1077 seems to be fixed loose hub and drive pulley on hydro pump,thanks for all your help. I figured it was something simple it's hard to kill a :D Share this post Link to post Share on other sites
