BritHorse 0 #1 Posted July 29, 2010 I'm quite a new Wheelhorse owner here in the UK. I have a 227-5 Europa tractor which I want to use mainly for grass cutting. I've used the deck which came with it a few times so far (it's a 42-inch rear discharge version, I think, and it has the long flexible cable to raise/lower the front of the deck!) It works...kind of, but I have real trouble getting it set up right, so maybe some one out there can help with advice - please! The problem is the drive/pulley under the engine and the main pulley on top of the deck which drives the spindles/cutting blades don't line up. I can get the belt on OK, but when I lower the position of the deck for cutting, the two pulleys are at different angles. After a while it either throws the belt off, or starts to shred it! Can someone tell me what I'm doing wrong? Thanks. Share this post Link to post Share on other sites