Deck drive belt part# needed

[rickv1957 74]

Can one you guys tell me the part# for a 37" deck drive belt drive belt on a 308,thanks Rick

[dgjks6 8]

Are you talking about the 2 blade side discharge 37 inch deck? It only has one belt that goes from the PTO to the mule drive and then to the deck. There is not a separate belt on the deck.

The 37inch side discharge deck belt # is 111178. It is the large 6 sided belt and the mule drive is different. It has 2 "v" pulleys. The deck umber is 05-37sc01.

In 1990 they made a 37 inch deck with a different drive belt, but in 1990 they didn't make a 308-8. The deck number in 1990 was 05-37sc02.

not sure of the difference between the sc01 and sc02.

[rickv1957 74]

The 37inch side discharge deck belt # is 111178. It is the large 6 sided belt and the mule drive is different. It has 2 "v" pulleys. The deck umber is 05-37sc01.

Thats it,thanks,Rick

[mcwh1950 2]

difference between the sc01 and sc02 .... the sc01 has 2 "v" pulleys and the sc02 has one flat and one v pulley .. the belt are alot different.

from a member here

linen beige

According to my Wheel Horse belt chart part # 110265 is cross section HA ( 1/2" wide 5/16" thick), 141 inches long. It is shown as the correct mower drive belt for the model 05-37SC02 from 1990.

For deck #05-37SC01, from 1989, it calls for mower drive belt #111178. It is a cross section HAA (SIX sided belt, 1/2" total width x 13/32" total height.) , 140.5 inches long.

I will say one thing the belt 110265 will fit a tiller

[rickv1957 74]

My 37" takes the 111178 Rick