clintonnut 126 #1 Posted July 22, 2010 I need pictures of the linkage and hookups for the cables on a Suburban 551. I will need accurate measurements of the links so I can make them. Charlie Share this post Link to post Share on other sites
clintonnut 126 #2 Posted July 23, 2010 Anyone? Charlie Share this post Link to post Share on other sites
formariz 11,995 #3 Posted July 24, 2010 Charlie Tomorrow I will take photos of mine and post it. Share this post Link to post Share on other sites
wallfish 17,610 #4 Posted July 24, 2010 I can get you some pics and measurements of the linkage but the motor is not on the tractor to show the throttle and choke hook up. It's an H55D from a 551. I'm in FL until Wed so it will be a few days. Send me a reminder if you don't get them by then. Share this post Link to post Share on other sites
Coadster32 793 #5 Posted July 25, 2010 Hey John, could you send a couple of pics my way also. I might be messing around with mine also. (watch those tan lines in Florida) :thumbs: Share this post Link to post Share on other sites
wallfish 17,610 #6 Posted July 25, 2010 I'll just post'em here on this thread so there's a reference for them. The only tan lines I'm watchn' down here are on the bikini butts. Makes me wish I was 21 again. Share this post Link to post Share on other sites
wallfish 17,610 #7 Posted August 1, 2010 here are the pics of my motor. Let me know what you need measuements for. OOPs, looks like I missed numbering the carb link Share this post Link to post Share on other sites
Butch 194 #8 Posted August 1, 2010 Sorry Charlie! I thought you were talking about Jim McGreevey! Butch S. Jersey Share this post Link to post Share on other sites
clintonnut 126 #9 Posted August 2, 2010 I thought something went on the shroud because I saw the area where it mounted. I just kept denying it because I had no idea what it looked like. Thank you so much JOHN!!! I guess I will need to post a wanted add for parts 4, 5, 6. Can you give me the approximate lengths of the links from hole to hole? I can make those. Charlie Share this post Link to post Share on other sites
Coadster32 793 #10 Posted August 2, 2010 Thanks for the pics John. I was hoping it didn't look like that. I tore into my H55 as it was running crappy. I got it back together, and it's running good now (with fresh paint and decals-also added electric starter). I didn't have the right stator plate for charging. (seems as though I might have seen one in my hands last year ) Thought I'd eliminate the tillison carb, and put on a Walbro type. I have the adapter plate to bolt it on right, but would need other stuff to get the govenor setup correct. Maybe some other day. Share this post Link to post Share on other sites
wallfish 17,610 #11 Posted August 3, 2010 My top link to the carb measures 3.5 inches and the bottom link to the gov measures 6.5 inches. If you can't find the parts, I can send you mine to reproduce. Just let me know if you need them. Share this post Link to post Share on other sites
